Fáilte chuig ár suíomhanna gréasáin!
English
Aonaid Imthacaí Liathróideacha Gléasta1
Aonaid Imthacaí Liathróideacha Gléasta2
meirge2(18)
meirge3(11)
meirge1(15)

Imthacaí UCP: An Tacaíocht Lárnach do Tharchur Cumhachta Tionsclaíoch

1, Sainmhíniú Bunúsach & Gnéithe StruchtúrachaTá

imthacaí UCPIs aonaid réamh-chomhthionóilte iad (Imthacaí Bloc Pillow le hIonchur) ina bhfuil iontráil imthacaí atá suite i bpeidestal iarainn teilgthe nó cruach brúite. Áirítear na príomhthréithe seo a leanas:

  • TáDromchla Seachtrach SféarúilTá dearadh sféarúil ag trastomhas seachtrach an imthacaí, rud a chuireann ar chumas é féin-ailínithe ±3°.
  • TáCumraíocht RéamhshéalaitheSoláthraíonn rónta rubair caighdeánacha (cumraíocht RS nó 2RS) cosaint IP54 i gcoinne deannaigh agus uisce.
  • TáTithíocht ChaighdeánaitheComhlíontach le ISO 113:2015, rud a chinntíonn inmhalartaitheacht tras-bhrandaí maidir le spásáil poill gléasta.

Tá2. Prionsabail Oibriúcháin & Airíonna MeicniúlaTá

2.1 Sásra Tarchuir Ualaigh

Tarlaíonn aistriú ualaigh trí eilimintí rollta (liathróidí cruach) idir fáinní istigh agus seachtracha:

  • TáUalaí GathachaTarchuirtear feadh gha an imthacaí (is ionann sin agus ~70% den acmhainn ualaigh).
  • TáUalaí AiseachaFreastal ar fhórsaí aiseacha aonthreoracha (≈20% den acmhainn ualaigh gathach).
  • Comhéifeacht frithchuimilte rollta thar a bheith íseal: 0.001–0.003
  • Uasluas: 3,000 rpm le bealaithe ramhar bunaithe ar litiam (saolré ramhar 2,000 uair an chloig ag 70°C).
  • Seaftaí tiomána comhcheangailte (teocht oibriúcháin: -30°C go 80°C)
  • Laghdaitheoirí fearas péiste córais uisciúcháin (ní mór bratuithe frith-chreimthe a bheith ag teastáil)
  • Aonaid tiomána crios iompair (malartáin cruach dhosmálta atá comhlíontach leis an FDA)
  • Meicníochtaí cromáin i meaisíní pacáistithe (a sheasann in aghaidh ualaí turraing timthriallacha)
  • Scáileáin chreathacha i mbrúiteoirí (tá séalaí labyrinth forlíontacha ag teastáil)
  • Rollóirí díomhaoin crios iompair (réitigh bhealaithe speisialta do thimpeallachtaí deannach)

2.2 Airíonna Triobolaíocha

Tá3. Cásanna Tipiciúla IarrataisTá

3.1 Innealra Talmhaíochta

3.2 Tionscal Próiseála Bia

3.3 Trealamh Mianadóireachta

Tá4. Treoirlínte Roghnúcháin Theicniúil

Uimhir Aonaid Imthacaí Toisí (orlach) nó (mm) Bolt Úsáidte mm/orlach. Uimhir Imthacaí Meáchan (kg)
d h a e b s1
UCP205 25 36.5 140 105 38 13 M10 UC205 0.81
UCP205-13 13/16 1-7/16 5-1/2 4-1/8 1-1/2 1/2 3/8 UC205-13 0.81
UCP205-14 7/8 1-7/16 5-1/2 4-1/8 1-1/2 1/2 3/8 UC205-14 0.81
UCP205-15 15/16 1-7/16 5-1/2 4-1/8 1-1/2 1/2 3/8 UC205-15 0.81
UCP205-16 1 1-7/16 5-1/2 4-1/8 1-1/2 1/2 3/8 UC205-16 0.81
UCP206 30 42.9 160 121 44 17 M14 UC206 1.23
UCP206-17 1-1/16 1-11/16 6-19/64 4-3/4 1-47/64 43/64 1/2 UC206-17 1.25
UCP206-18 1-1/8 1-11/16 6-19/64 4-3/4 1-47/64 43/64 1/2 UC206-18 1.25
UCP206-19 1-3/16 1-11/16 6-19/64 4-3/4 1-47/64 43/64 1/2 UC206-19 1.25
UCP206-20 1-1/4 1-11/16 6-19/64 4-3/4 1-47/64 43/64 1/2 UC206-20 1.25
UCP207 35 47.6 167 127 48 17 M14 UC207 1.55
UCP207-20 1-1/4 1-7/8 6-9/16 5 1-7/8 43/64 1/2 UC207-20 1.613
UCP207-21 1-5/16 1-7/8 6-9/16 5 1-7/8 43/64 1/2 UC207-21 1.613
UCP207-22 1-3/8 1-7/8 6-9/16 5 1-7/8 43/64 1/2 UC207-22 1.613
UCP207-23 1-7/16 1-7/8 6-9/16 5 1-7/8 43/64 1/2 UC207-23 1.613
UCP208 40 49.2 184 137 54 17 M14 UC208 1.87/1.98
UCP208-24 1-1/2 1-15/16 7-1/4 5-13/32 2-1/8 43/64 1/2 UC208-24 1.89/2
UCP208-25 1-9/16 1-15/16 7-1/4 5-13/32 2-1/8 43/64 1/2 UC208-25 1.89/2
UCP209 45 54 190 146 54 17 M14 UC209 2.16/2.25
UCP209-26 1-5/8 2-1/8 7-15/32 5-3/4 2-1/8 43/64 1/2 UC209-26 2.17/2.26
UCP209-27 1-11/16 2-1/8 7-15/32 5-3/4 2-1/8 43/64 1/2 UC209-27 2.17/2.26
UCP209-28 1-3/4 2-1/8 7-15/32 5-3/4 2-1/8 43/64 1/2 UC209-28 2.17/2.26
UCP210 50 57.2 206 159 60 20 M16 UC210 2.7
UCP210-29 1-13/16 2-1/4 8-1/8 6-1/4 2-3/8 25/32 5/8 UC210-29 2.7
UCP210-30 1-7/8 2-1/4 8-1/8 6-1/4 2-3/8 25/32 5/8 UC210-30 2.7
UCP210-31 1-15/16 2-1/4 8-1/8 6-1/4 2-3/8 25/32 5/8 UC210-31 2.7
UCP210-32 2 2-1/4 8-1/8 6-1/4 2-3/8 25/32 5/8 UC210-32 2.7
UCP211 55 63.5 219 171 60 20 M16 UC211 3.3/3.46
UCP211-32 2 2-1/2 8-5/8 6-47/64 2-3/8 25/32 5/8 UC211-32 3.45/3.61
UCP211-33 2-1/16 2-1/2 8-5/8 6-47/64 2-3/8 25/32 5/8 UC211-33 3.45/3.61
UCP211-34 2-1/8 2-1/2 8-5/8 6-47/64 2-3/8 25/32 5/8 UC211-34 3.45/3.61
UCP211-35 2-3/16 2-1/2 8-5/8 6-47/64 2-3/8 25/32 5/8 UC211-35 3.45/3.61
UCP212 60 69.8 241 184 70 20 M16 UC212 4.65/4.9
UCP212-36 2-1/4 2-3/4 9-1/2 7-1/4 2-3/4 25/32 5/8 UC212-36 4.65/4.9
UCP212-37 2-5/16 2-3/4 9-1/2 7-1/4 2-3/4 25/32 5/8 UC212-37 4.65/4.9
UCP212-38 2-3/8 2-3/4 9-1/2 7-1/4 2-3/4 25/32 5/8 UC212-38 4.65/4.9
UCP212-39 2-7/16 2-3/4 9-1/2 7-1/4 2-3/4 25/32 5/8 UC212-39 4.65/4.9
UCP213 65 76.2 265 203 70 25 M20 UC213 5.66/5.97
UCP213-40 2-1/2 3 10-7/16 8 2-3/4 63/64 3/4 UC213-40 5.72/6.03
UCP213-41 2-9/16 3 10-7/16 8 2-3/4 63/64 3/4 UC213-41 5.72/6.03
UCP214 70 79.4 266 210 72 25 M20 UC214 6.3
UCP214-42 2-5/8 3-1/8 10-15/32 8-17/64 2-27/32 63/64 3/4 UC214-42 6.3
UCP214-43 2-11/16 3-1/8 10-15/32 8-17/64 2-27/32 63/64 3/4 UC214-43 6.3
UCP214-44 2-3/4 3-1/8 10-15/32 8-17/64 2-27/32 63/64 3/4 UC214-44 6.3
UCP215 75 82.6 275 217 74 25 M20 UC215 6.79
UCP215-45 2-13/16 3-1/4 10-53/64 8-35/64 2-29/32 63/64 3/4 UC215-45 6.79
UCP215-46 2-7/8 3-1/4 10-53/64 8-35/64 2-29/32 63/64 3/4 UC215-46 6.79
UCP215-47 2-15/16 3-1/4 10-53/64 8-35/64 2-29/32 63/64 3/4 UC215-47 6.79
UCP215-48 3 3-1/4 10-53/64 8-35/64 2-29/32 63/64 3/4 UC215-48 6.79
UCP216 80 88.9 292 232 78 25 M20 UC216 8.48
UCP216-49 3-1/16 3-1/2 11-1/2 9-1/8 3-1/16 63/64 3/4 UC216-49 8.48
UCP216-50 3-1/8 3-1/2 11-1/2 9-1/8 3-1/16 63/64 3/4 UC216-50 8.48
UCP216-51 3-3/16 3-1/2 11-1/2 9-1/8 3-1/16 63/64 3/4 UC216-51 8.48

Tá

Am an phoist: 12 Deireadh Fómhair 2025